DELTA®-MULTI-BAND
DELTA® accessory for sealing overlaps, penetrations and connections in roof membranes.
DELTA-MULTI-BAND® FLEXX: The Roofer's Membrane Tape
One tape for almost every detail on the roof. DELTA-MULTI-BAND® FLEXX is a universal, highly age-resistant adhesive tape with maximum adhesive strength, for exterior and interior use. It grips fleece surfaces better than ever and keeps its hold in cold weather, so you can seal laps and repair membranes in real Irish conditions.
- Fit from (smooth)
- -5 °C
- Fit from (fleece)
- 0 °C
- Widths
- 60 mm / 100 mm
- Roll length
- 25 m
Interested in DELTA-MULTI-BAND® FLEXX?
Ask us about the right build-up, quantities, availability and delivery for your project.
Advantages
- Universal usability
Suitable for indoor and outdoor applications and on a wide variety of substrates. One adhesive tape for almost all problems.
- Optimised adhesion to nonwovens
The material is optimised for non-woven surfaces, with even higher initial adhesion, even on other substrates.
- Increased rain resistance
A softer adhesive penetrates better into the fleece structure, which gives you more security at overlaps and connections.
- Improved cold adhesion
Use it on smooth surfaces from -5 °C and on fleece surfaces from 0 °C for tight connections even at low temperatures.
- Very good UV and ageing resistance
It gives permanently tight membrane overlaps, board joints and connection details. The requirements of DIN 4108-11 are reliably fulfilled.
- Enables healthy buildings
Low-emission building products are an important prerequisite for healthy buildings. DELTA-MULTI-BAND® FLEXX fulfils the highest requirements according to AgBB, SINTEF, A+ and EC1PLUS.
- Discreet design
The black surface with anthracite-coloured printing gives a high-quality, unobtrusive finish, for example on DELTA-XX PLUS® types or DELTA®-PVG PLUS.
Where to Use
DELTA-MULTI-BAND® FLEXX is suitable for indoor and outdoor use. Use it to bond and repair all DELTA® membranes, always on the printed upper side of the product.
It also bonds to comparable substrates and to hard plastic, metal, wood-based materials, smooth wood and concrete. It is particularly suitable for bonding to non-woven surfaces.
Quick guide for roofers
Smooth surfaces (for example DELTA®-MAXX PLUS): fit from -5 °C.
Non-woven surfaces (for example DELTA-XX PLUS®): fit from 0 °C. Temperature-controlled storage is recommended.
Product Data
- Material
- Solvent- and plasticiser-free, low-viscosity pure acrylic adhesive with embedded PET scrim on UV-stabilised black, soft and easy-to-form PP cover film with siliconised release paper
- Processing on smooth surfaces
- from -5 °C (for example DELTA®-MAXX PLUS)
- Processing on non-woven surfaces
- from 0 °C (for example DELTA-XX PLUS®); temperature-controlled storage recommended
- Temperature resistance
- -40 °C to +80 °C
- Storage life
- 2 years in the original box, avoid direct heat sources
- Roll width
- 60 mm / 100 mm (100 mm with split release paper)
- Roll length
- 25 m (60 mm width also in 40 m length)
- Conformity
- In accordance with DIN 4108-7 and DIN 4108-11, DTU 31.2 (F), SIA 180, SIA 232/1 (CH), ÖNORM B 8110-2 (A), ÖNORM B 2340
- VOC emissions
- Compliance with AgBB, SINTEF, A+ and EC1PLUS requirements
Values are typical. Check the current Dörken data sheet before specifying.
Related Products
DELTA®-FLEXX-BAND FG 80/150
DELTA® accessory for sealing overlaps, penetrations and connections in roof membranes.
DELTA®-FLEXX-BAND F100
DELTA® accessory for sealing overlaps, penetrations and connections in roof membranes.
DELTA®-SCHAUM-BAND
DELTA® accessory for sealing overlaps, penetrations and connections in roof membranes.
Frequently Asked Questions
What is DELTA-MULTI-BAND® FLEXX used for?
It bonds and repairs DELTA® membranes, and bonds to comparable substrates, indoors and outdoors. Apply it to the printed upper side of the membrane.
Can I use it in cold weather?
Yes. Use it on smooth surfaces from -5 °C and on fleece surfaces from 0 °C. Temperature-controlled storage is recommended.
Does it stick to fleece membranes?
Yes. It is optimised for non-woven surfaces, with higher initial adhesion and a softer adhesive that penetrates the fleece structure.
What else will it bond to?
Hard plastic, metal, wood-based materials, smooth wood and concrete.
Can I use it outside?
Yes. It is suitable for indoor and outdoor use, with very good UV and ageing resistance.
What sizes does it come in?
Rolls are 60 mm or 100 mm wide (the 100 mm roll has split release paper) and 25 m long. The 60 mm roll is also available in 40 m.
How long can I store it?
Two years in the original box. Keep it away from direct heat sources.
Is it low emission?
Yes. It complies with AgBB, SINTEF, A+ and EC1PLUS requirements.
Do you supply it in Ireland?
Yes. Contact Commons House Design for availability, quantities and delivery.
